Moffat MDW 542 - Manual (Page 7)

7
Programme Use Cycle description
Programme table
65° Normal soil. Prewash - Main wash
Normal Crockery, cutlery, pots and pans 2 intermediate rinses - Final rinse
Dry
Any. Prewash
Rinse and Hold Partial load (to be completed later in the
day). This programme does not require the
use of detergent.
65° Light soil. Main wash - Final rinse
Quick Crockery and cutlery
50° Normal soil. Prewash - Main wash
Bio Crockery and cutlery 1 intermediate rinse - Final rinse
Dry
Before the first use
When using separately special
(dishwasher) salt, rinse aid and
detergent:
- set the water softener
- add special (dishwasher) salt
- fill up with rinse aid
When using tablets that integrate
rinse aid and detergent:
there is no need to fill up with rinse aid
- set the water softener
- add special (dishwasher) salt
When using tablets that integrate
rinse aid, detergent, salt function
and other additives:
there is no need to fill up with special salt or
rinse aid.
Check whether these detergents are suitable
for your water hardness. Follow the
manufacturers instructions.
- Set the water hardness to level 1.
IMPORTANT!
If the drying results are not satisfactory we
recommend that you:
1. Fill up the rinse aid dispenser with rinse aid.
2. Set the rinse aid dosage to position 2.
If you decide in future to use separated
detergents, we advise that you:
- Fill up the salt and rinse aid container.
- Adjust the water hardness setting to the
highest level and perform 1 normal washing
programme without loading any dishes.
- Adjust the water hardness setting according
to the hardness of the water in your area.
- Adjust the rinse aid dosage
152952 66/0en 13-02-2006 17:05 Pagina 7