Setting the water softener, Setting the water softener manually (see table) – Moffat MDW 542 User Manual
Page 8
8
Setting the water softener
The dishwasher is equipped with a water
softener designed to remove minerals and salts
from the water supply, which would have a
detrimental or adverse effect on the operation
of the appliance.
The softener should be adjusted according to
the hardness of the water in your area. Your
local Water Authority can advise you on the
hardness of the water in your area.
IMPORTANT!
The water softener must be set in both ways:
manually and electronically.
51 - 70
9,0 - 12,5
IV
2
level 10
43 - 50
7,6 - 8,9
IV
2
level 9
37 - 42
6,5 - 7,5
IV
2
level 8
29 - 36
5,1 - 6,4
IV
2
level 7
23 - 28
4,0 - 5,0
IV
2
level 6
15 - 18
2,6 - 3,2
III
1
level 4
4 - 10
0,7 - 1,8
I/II
1
level 2
19 - 22
3,3 - 3,9
III
2
level 5
11 - 14
1,9 - 2,5
II
1
level 3
< 4
< 0,7
I
1
level 1
no salt necessary
Water hardness
Adjustment of the water hardness setting
in °dH
1)
in mmol/l
2)
Range
manually
electronically
1) (°dH) German degree, measure of the water hardness.
2) (mmol/l) millimol per litre, international unit for water hardness
The water softener is factory set at
position 2.
Setting the water softener manually (see table)
Set switch to position 1
or 2
152952 66/0en 13-02-2006 17:05 Pagina 8