MSI MS-6380 - Manual (Page 39)

Hardware Setup
2-23
- Enable Line-out connector on
the back panel
- Disable Front Panel Audio
Connector
Note: To have the Line-out connector on the back panel work
properly, you need to place the jumper on pin# 11~14 of the JAU1
connector or on pin#5~6 and 9~10 of the JAUDIO2 connector.
Otherwise, this Line-out connector will not function and nothing
can be heard through speakers or headphones attached to the
connector. But front panel audio connector is enabled at this
point and allows you to connect speakers or headphones.
- Disable Line-out connector on
the back panel
- Enable Front Panel Audio
Connector
1
18 2
17
12
11
14
13 1
18 2
17
12
11
14
13
(OPEN pin# 11~14) (SHORT pin# 11~14)
10
9 1
2
JAUDIO2
10
9 1
2
6
5
6
5
(OPEN pin# 5~6 and 9~10) (SHORT pin# 5~6 and 9~10)
JAU1
(Optional)