MSI MS-6380 - Manual (Page 68)

Chapter 3
3-24
as main memory and wake-capable devices and all
system context is saved to main memory. The informa-
tion stored in memory will be used to restore the PC to
the previous state when an “wake up” event occurs.
Power Management Option
This item is used to select the degree (or type) of power saving and is
related to these modes: Doze Mode and Suspend Mode. There are three
options for power management:
Min Saving Minimum Power Management. Doze Mode = 1 Hour,
Suspend Mode = 1 Hour.
Max Saving Maximum Power Management. Doze Mode = 1 Min.,
Suspend Mode = 1 Min.
User Define Allows end users to configure each mode separately.
HDD Power Down
If HDD activity is not detected for the length of time specified in this field,
the hard disk drive will be powered down while all other devices remain
active. Settings: Disable and 1 Min through 15 Min.
Doze Mode
After the selected period of system inactivity, the CPU clock will run at
slower speed while other devices still run at full speed. Settings: Disable, 1
Min, 2 Min, 4 Min, 6 Min, 8 Min, 10 Min, 20 Min, 30 Min, 40 Min and 1
Hour.
Suspend Mode
If system activity is not detected for the length of time specified in this field,
all devices except CPU will be shut off. Settings are Disable, 1 Min, 2 Min, 4
Min, 6 Min, 8 Min, 10 Min, 20 Min, 30 Min, 40 Min and 1 Hour.
PM Control by APM
Setting to Yes will activate an Advanced Power Management (APM) device
to enhance Max Saving mode and stop CPU internal clock. Settings: Yes and
No.