MSI MS-6380 - Manual (Page 63)

AWARD ® BIOS Setup
3-19
feature. Selecting Auto allows the mainboard to detect whether an
audio device is used. If an audio device is detected, the onboard
AC’97 controller will be enabled; if not, the controller is disabled.
Disable the function if you want to use other controller cards to
connect an audio device. Settings: Disabled and Auto.
VIA-3068 MC97 Modem
This item is used to enable or disable the MC’97 (Modem Codec’97)
feature. Selecting Auto allows the mainboard to detect whether a
modem is used. If a modem is detected, the onboard MC’97 controller
will be enabled; if not, the controller is disabled. Disable the controller
if you want to use other controller cards to connect modems. Settings:
Disabled and Auto.
Init Display First
This item specifies which VGA card is your primary graphics adapter.
Available settings are PCI Slot and AGP.
OnChip USB Controller
The item specifies which USB (Universal Serial Bus) Port is enabled. The
settings are All Disabled, ALL Enabled, 1 USB Port and 2 USB Port.
USB Keyboard/Mouse Support
Set to Enabled if your need to use an USB keyboard/mouse in the operating
system that does not support or have any USB driver installed, such as DOS
and SCO Unix.
IDE HDD Block Mode
This allows your hard disk controller to use the fast block mode to transfer
data to and from the hard disk drive. Block mode is also called block
transfer, multiple commands or multiple sector read/write. Enabled enables
IDE controller to use block mode; Disabled allows the controller to use
standard mode.
POWER ON Function
This controls how the PS/2 mouse or keyboard can power on the system.
Settings are Password, Hot KEY, Mouse Left, Mouse Right, BUTTON ONLY