Qm45_section_5_uc, Checklist – Manitowoc Ice QM45 Series User Manual

Page 31

Advertising
background image

Section 5

Before Calling for Service

5-1

Section 5

Before Calling for Service

Checklist

If a problem arises during operation of your ice machine, follow the checklist below before calling for service.
Routine adjustments and maintenance procedures are not covered by the warranty.

Problem

Possible Cause

To Correct

Ice machine does not operate.

No electrical power to the ice

machine.

Replace the fuse/reset the

breaker/turn on the main switch/plug

power cord into receptacle.

ON/OFF/ WASH toggle switch set

improperly.

Move the toggle switch to the ON

position.

Damper in open position (down).

Damper must be capable of

swinging freely. See page 6-2.

Ice machine stops, and can be
restarted by moving the toggle

switch to OFF and back to ICE.

Safety limit feature stopping the ice
machine.

Refer to “Safety Limit Feature” on the
next page.

Ice machine does not release
ice or is slow to harvest.

Ice machine is dirty.

Clean and sanitize the ice machine.
See pages 4-3 and 4-4.

Ice machine is not level.

Level the ice machine.

See page 2-3.

Low air temperature around ice

machine (air-cooled models).

Air temperature must be at least 35°F

(1.6°C).

Water regulating valve leaks in harvest
mode (water-cooled models).

Replace water-regulating valve.

Ice machine does not cycle

into harvest mode.

The six-minute freeze time lock-in has

not expired yet.

Wait for freeze lock-in to expire.

Ice thickness probe is dirty.

Clean and sanitize the ice machine.
See pages 4-3 and 4-4.

Ice thickness probe wire is
disconnected.

Connect the wire.

Ice thickness probe is out of

adjustment.

Adjust the ice thickness probe. See

page 3-5.

Uneven ice fill (thin at top of

evaporator).

See “Shallow or Incomplete Cubes”

on the next page.

Ice quality is poor (soft or not

clear).

Poor incoming water quality.

Contact a qualified service company

to test the quality of the incoming
water and make appropriate filter

recommendations.

Water filtration is poor.

Replace the filter.

Ice machine is dirty.

Clean and sanitize the ice machine.
See pages 4-3 and 4-4.

Water siphon is not working.

Check the water siphon system.
See page 3-4.

Water softener is working improperly (if

applicable).

Repair the water softener.

Continued on next page...

Advertising