McIntosh MVP861 - Manual (Page 10)

10
How to Connect Control, Analog and Digital Audio
1. Connect a Power Control Cable from the MVP861
POWER CONTROL IN to the POWER CONTROL
ACC Output jack of a McIntosh A/V Control Center.
2. Connect a Data Cable from the MVP861 DATA IN
jack to the DVD DATA jack on the McIntosh A/V Con-
trol Center.
3. Connect a Coaxial Cable from the MVP861 DIGITAL
AUDIO COAXIAL OUTPUT to the DVD Coaxial
DIGITAL INPUT of a McIntosh A/V Control Center.
Note: An optional connecting method is to use an optical
cable from the MVP861 DIGITAL AUDIO
OPTICAL OUTPUT to the Optical Digital Input of
a McIntosh A/V Control Center.
4. Connect Audio Cables from the MVP861 UNBAL-
ANCED 2CH AUDIO OUTPUTS to the DVD Inputs
on a McIntosh A/V Control Center.
5. Optionally connect Audio Cables from the MVP861
BALANCED 2CH AUDIO OUTPUTS to the Zone A
Balanced 1 Inputs on a McIntosh A/V Control Center.
6. Connect Audio Cables from the MVP861 UNBAL-
ANCED 5.1CH AUDIO OUTPUTS (all six channels)
to the External AUDIO INPUTS on a McIntosh A/V
Control Center.
How to Connect Control, Analog and Digital
Audio
McIntosh A/V Control Center