McIntosh MVP861 - Manual (Page 19)

19
SETUP, con’t
3. The Subtitle Preference Menu will now appear on the
screen with the default selection of Off. To change to
Subtitle On select the desired language use the Up
or
Down directional Push-buttons followed by the SE-
LECT Push-button. Refer to figure 5.
Notes: The title of the icon button-bar will change color
from yellow (the cursor color) to green indicating
the selected item. The choice of “Others” is for use
outside of North America.
4. Return to the Disc Setup Menu by pressing the Up
directional Push-button.
5. Next continue to the MENU Settings. If no other
changes are to be made in Setup Mode at this time, exit
by pressing the Down
directional Push-button to se-
lect the EXIT SETUP menu choice followed by the
SELECT Push-button and the MVP861 will return to
normal operation.
Note: The SETUP Push-button may be also pressed to
exit the setup mode.
Disc Menus
This selects the language of the menus that will be seen on
the TV/Monitor.
Note: The Alternate Languages of French and Spanish may
not be available on all DVD Discs.
1. Press the SETUP Push-button on the supplied Remote
Control to access the On-Screen Disc Setup Menu. Re-
fer to figures 4 and 7.
2. Use the Down directional Push-button followed by
the SELECT Push-button on the Remote Control to se-
lect the Disc Menu.
3. To change the English setting to another language use
the Up or Down directional Push-buttons followed
by the SELECT Push-button. Refer to figure 6.
Notes: The title of the icon button-bar will change color
from yellow (the cursor color) to green indicating
the selected item. The choice of “Others” is for use
outside of North America.
4. Return to the Disc Setup Menu by pressing the Up
directional Push-button.
5. Next continue to the OSD Settings. If no other changes
are to be made in Setup Mode at this time, exit by
pressing the Down
directional Push-button to select
the EXIT SETUP menu choice followed by the SE-
LECT Push-button and the MVP861 will return to nor-
mal operation.
Note: The SETUP Push-button may be also pressed to
exit the setup mode.
Figure 7