Motorola ML910 - Manual (Page 107)

BIOS Setup Utility & MLUA 5-13
ML User Application (MLUA)
As previously described, the MLUA is designed for users to configure the parameters of various
functions in the notebook. By using these configuration parameters, you can change the default
configuration that automatically loads when you turn on the computer.
ML User Application is automatically launched every time you boot your notebook into Windows
Operating System. This can be indicated by the ML User Application icon on the task bar.
Double-click on the ML User Application icon will bring up the application window.
ML User Application is presented in a tab-based user interface, which consists of below tabs:
• About tab displays the following system information:
o
Motherboard Version
o
BIOS Version
o
EC Version
o
ML Service Version
o
Application Version
• GPS tab displays the name of the built-in GPS module, and it allows user to turn ON or OFF
the built-in GPS module. Default setting is OFF.
• General Purpose I/O tab allows user to turn ON or OFF the GPIO port 0 and GPIO port 1 when
notebook is docked to a Vehicle Dock. Default setting is OFF both GPIO ports.
• Monitor tab displays the following information:
o
Processor Temperature
o
Battery Capacity
o
Car Voltage
o
Docking Board Temperature
o
Docking Fan Speed
• WWAN Device tab displays the name of the built-in WWAN module, and it allows user to turn
ON or OFF the built-in WWAN module. Default setting is OFF.