Motorola ML910 - Manual (Page 38)

Rear Components
Ref Component Description See Also
RJ-11 Port Connects the telephone line. P. 2-20
RJ-45 Port
Connects the LAN cable. Included a link indicator
and an active indicator.
P. 2-19
GPS RF pass
through Port
Serves as the interface between the system and
external GPS antenna, in conjunction with a
Vehicle Docking station.
P. 2-25
WWAN Module
RF pass
through Port
Serves as the interface between the system and
antenna of the optional WWAN module, in
conjunction with a Vehicle Docking station.
P. 2-21
Docking Port
For connecting to an Office Port Replicator or
Vehicle Dock (both are available as an option).
USB Port 1
USB Port 2
Supports USB2.0 (i.e. USB High Speed Devices)
and Legacy USB Full and Low Speed Devices (i.e.
USB 1.1 and YSB1.0); and up to 1A load for each
USB Port.
P. 4-3
Power
Connector
Connects the AC adapter. P. 1-4
CAUTION:
For protection against transient over-voltages from the environment, the RF Pass-through Port for the
GPS and WWAN should only be engaged using the docking station, supplementary steps may be
necessary when doing an external installation."
1-10 Getting Started