Motorola WPS870G - Manual (Page 24)

User Guide
WPS870G
PAGE 17
– If you selected WPA-PSK, the Wireless Security Settings window is displayed:
18
Match the type of security used by the wireless network.
– For WEP security, if you select Pass-phrase as your Key Input Method, enter the
pass-phrase and click Generate Keys.
– For WPA-PSK, type in the required pass-phrase.
Once entered, click Next and confirm the settings.
19
Once all settings are acceptable, click Accept. The Print Server Configuration
Complete! window is displayed.
If want to connect to the WPS870G using Ethernet, click Next.
If you want to connect wirelessly to your WPS870G, follow these instructions:
– Connect the printer to the appropriate port on the WPS870G. Parallel port cables
should be less than 9.8 feet (3 meters) long.
– To wirelessly connect the WPS870G to your wireless network, unplug the power
cable from the WPS870G.
– Unplug the Ethernet cable from the WPS870G.
– Unplug the other end Ethernet cable from the wireless router.
– Plug the power cable back in to the WPS870G. The WPS870G wirelessly
associates with your wireless router and the Wireless LED illuminates.