Print jobs management, Delete a printing port, Wps870g user guide – Motorola WPS870G User Manual
Page 65
WPS870G
User Guide
PAGE 58
The Configure Standard TCP/IP Port Monitor window is displayed:
6
On the Port Settings tab:
– Select
LPR
– Enter
a
Queue name
(L1 for Port 1 (Parallel), L2 for Port 2 (USB))
– Ensure the LPR Byte Counting Enabled setting is selected.
7
Click OK to confirm your changes and close this window. Follow the prompts to
complete the Wizard. IP printing is now enabled.
Print Jobs Management
Print jobs can be managed like any Windows printer. Open the Printers folder (Start >
Settings
>
Printers
) and double-click any printer to see the current print jobs.
If the printer attached to the WPS870G has been changed (for example its driver has been
updated), run the Add IPP Port program again and select the correct printer.
Delete a Printing Port
If the WPS870G’s IP address has changed, and you can no longer print, delete the
WPS870G’s port and re-install it.
To delete a port, use the Windows Delete Port facility:
1
Right-click any printer in the Printers folder and select Properties.
2
On the Details or Ports tab (depending on your version or Windows), locate and click
Delete Port
.