Multi-Tech Systems MT9234ZBA - Manual (Page 12)

Chapter 3 – Operation
12 Multi-Tech Systems, Inc. MT9234ZBA-Series User Guide (S000387A)
4. The Global Wizard dialog box appeared. Click Next.
5. The Global Wizard searches for your modem and identifies it. Click Next.
6. Select the country/region in which the modem will be used. Click Next.
7. Review your country/region choice. If it is correct, click Next to configure the modem.
8. When Global Wizard announces that the parameters have been set, click Finish to exit.
Using AT Commands to Configure Your Modem
Non-Windows users can configure the modem using AT commands. You must enter these commands in your
communication program’s terminal window.
1. Run your favorite communication program and open the program’s terminal window.
2. To configure the modem for a specific country/region:
Type AT%T19,0,nn, where nn is the country/region code in hexadecimal notation.
Click E NTER . The message OK displays.
3. To verify that the correct country/region has been configured, type:
ATI9 and click E NTER .
The country/region code displays:
Example: Country/Region AT Command (hexadecimal) Result code (decimal)
Euro/NAM AT%T19,0,34 (default) 52
A list of country/region codes can be found on the Multi-Tech Web site at:
http://www.multitech.com/PRODUCTS/Info/approvals
Then click on global modems . The Global Modem Country Approvals page displays.
On this page you can view approvals, configuration strings and responses by
country and products.