Miller Electric 714D - Manual (Page 20)

OM-1500-1 Page 16
SECTION 5 – OPERATION
5-1. Operational Terms
The following is a list of terms and their definitions as they apply to this wire feeder:
General Terms:
Cold Wire Jog Feeding wire without contactor or gas valve being energized.
Sequence A portion of the weld program, such as preflow, run-in, start, weld, crater, burnback, and postflow.
Weld Program A group of sequences that make up a weld cycle.
Current Detect Override Is used to disable run-in when a welding power source is used that doesn’t provide current feedback
through the 14-pin receptacle.
5-2. Power Switch
1 Power Switch
1
802 809-A