Mitel Navigator 3300 ICP - Manual (Page 26)

Navigator User Guide
20
9. Do one of the following:
• To enter a new number, dial the number.
Press (HOLD) between digits to create a pause during dialing—press
(HOLD) more than once to lengthen the pause.
• To enter a trunk flash, press
(TRANS/CONF).
(See "Trunk Flash" for more information about the use of this feature.)
• To enter the last number dialed, press
(REDIAL).
10. If you want the number to be private, press the Priv softkey.
11. Press the Save softkey.
12. Press (SUPERKEY).
Speed Call - Personal
To dial a stored personal Speed Call number:
1. Lift the handset.
2. Dial *58.
3. Enter an index number between 00 and 09.
To store a personal Speed Call number:
1. Lift the handset.
2. Dial *67.
3. Enter an index number between 00 and 09.
4. Dial the number to be stored
Press (HOLD) between digits to create a pause during dialing—press (HOLD)
more than once to lengthen the pause.
5. Hang up.
Handsfree Operation
To use Handsfree operation, ensure that your PC headset is disconnected.
To make a Handsfree call:
1. If you want to use a Non-Prime Line, press a Line Appearance key.
Note: Your administrator must program Line Appearances to your phone.
2. Dial the number.
3. Begin speaking when the called party answers. Your phone’s Handsfree microphone and
Handsfree speaker transmit and receive audio.