Mitel Navigator 3300 ICP - Manual (Page 46)

Navigator User Guide
40
To start recording while on a two-party call:
• Press
the Record Call key.
See Personal Feature Keys on page 15 for instructions on programming a Record Call
feature key to your phone.
Note: Your system may be programmed to automatically begin recording external calls when
you or the other answers.
To pause recording:
• Press
the Pause softkey.
To resume recording after pausing:
• Press
the Resume softkey.
To stop a recording without saving it:
• Press
the Stop&Erase softkey.
To stop and save a recording:
• Press
the Stop&Save softkey.
Putting the call on hold saves the recording; taking the call off hold starts a new recording.
Depending on system programming, hanging up, or pressing
(TRANS/CONF) or a DSS
key may also save the recording.
To listen to a recording:
1. Lift the handset.
2. Access your voice mailbox.
3. Follow the prompts to retrieve the recording.
Release
Release lets you disconnect from an attempted Call Transfer or Conference Call without hanging
up the handset. Release is useful when you encounter a busy or unavailable party and wish to
make another call immediately.
To release from an attempted transfer or conference call:
• Press
the Release softkey
or
• Press
the Release feature key.