Mitel Navigator 3300 ICP - Manual (Page 29)

Navigator User Guide
23
To answer a call with a Mitel Headset:
• Press flashing Line Appearance key
or
• Quickly press and release the headset's feature control switch (if available).
Note: If Auto-Answer is enabled on your phone, see the “Auto-Answer” section elsewhere in
this guide for call-anwering procedures.
To mute the headset microphone, do one of the following:
• Press (MUTE). The
key light turns ON.
• Press and hold the headset's feature control switch.
To turn Mute off and return to the conversation, do one of the following:
• Press the lit
(MUTE) key. The key light turns OFF.
• Release the headset mute feature switch (if available).
To hang up, do one of the following:
• Press (CANCEL)
• Quickly press and release the headset's feature control switch.
To disable Mitel Headset operation:
• Press
the Headset feature key.
Auto Answer
To enable or disable Auto Answer:
1. Press (SUPERKEY).
2. Press the No softkey until "Auto Answer?" appears.
3. Do one of the following:
• To enable Auto-Answer, press the TurnOn softkey.
• To disable Auto-Answer, press the TurnOff softkey.
To answer a call when you hear ringback:
• Begin speaking.
If your PC headset is connected, your PC headset earphones and microhone transmit and
receive audio.
If your PC headset is not connected, your phone’s Handsfree microphone and Handsfree
speaker transmit and receive audio.