Meridian America 541 - Manual (Page 38)

Setting up the surround controller
32
To connect a TV
MONITOR
IN
Video leads
TUNER
OUT
541 Surround Controller
Audio lead
AUDIO
OUT
TV
OUT
TV
IN A5
Television
● Connect the TV C-VIDEO OUT or the TV SCART connector to
the television SCART input or composite video input using a
suitable video cable.
If your television provides RGB inputs, and your LaserDisc had
RGB outputs, you can achieve higher quality by connecting
between them using the RGB connections from the surround
controller’s TV SCART connector.
The TV SCART connector also provides a Function Select signal,
used by most televisions to perform input switching.
To connect a VCR
INPUTS
Video leads
OUTPUTS
541 Surround Controller
Audio leads
VIDEO
AUDIO
VCR
OUT VCR1
IN
A6 TAPE OUT
Video recorder
● Connect the VCR audio outputs to the surround controller’s
VCR1/A6 audio inputs using an audio phono lead.
● Connect one pair of the surround controller’s TAPE OUT
sockets to the VCR audio inputs using an audio phono lead.
● Connect the VCR composite video output to the surround
controller’s VCR1/V3 C-VIDEO IN input using a composite
video lead.
● Connect the surround controller’s VCR C-VIDEO OUT socket
to the VCR composite video input using a composite video
lead.
Connecting video