Canadian limitations notice, Emc, safety, and r&tte directive compliance, New zealand telecom warning notice – Multi-Tech Systems MT2834BL User Manual
Page 116: South african notice
116
Appendix F - Regulatory Information
Multi-Tech Systems, Inc. MT2834BA/BL Series User Guide
7.
Some parameters required for compliance with Telecom’s Telepermit requirements are dependent on the
equipment (PC) associated with this device. The associated equipment shall be set to operate within the following
limits for compliance with Telecom’s Specifications:
For repeat calls to the same number:
i
There shall be no more than 10 call attempts to the same number within any 30-minute period for any
single manual call initiation, and
i
The equipment shall go on-hook for a period of not less than 30 seconds between the end of one attempt
and the beginning of the next attempt.
For automatic calls to different numbers:
i
The equipment shall be set to ensure that automatic calls to different numbers are spaced such that
there is no less than 5 seconds between the end of one call attempt and the beginning of another.
For automatically answered incoming calls:
i
The equipment shall be set to ensure that calls are answered between 3 and 30 seconds of receipt of
ringing.
8.
For correct operation, total of the RN’s of all devices connected to a single line at any time should not exceed 5.
South African Notice
This modem must be used in conjunction with an approved surge protection device.