Multi-Tech Systems MT2834BL - Manual (Page 31)

31
Chapter 5 - Command Mode
Multi-Tech Systems, Inc. MT2834BA/BL Series User Guide
CONFIGURE DATA &E14 Data Compression Disabled
COMPRESSION &E15 Data Compression Enabled
CONFIGURE SPEED $BA0 Speed Conversion On
CONVERSION $BA1 Speed Conversion Off
$MB Set modem speed (e.g.,$MB14400)
$SB Set serial port speed (e.g.,$SB57600)
EXECUTE $H Help
IMMEDIATE I Product Code Inquiry
ACTION I 9 Windows 95 Autodetect Inquiry (2834 Series only)
COMMANDS L5 List Current Operating Parameters
L6 List S-Register Values
L7 List additional Configuration Parameters
L8 List On-Line Diagnostics
H Off Hook
+++AT<CR> Escape Sequence: Entering Command Mode while On-Line
%E Escape Sequence Options...Entering Command Mode while On-Line
A Force Answer Mode
O Exit Command Mode/Go Back On-Line
EXECUTE %DF Format Line Probe Display (Graph or Table Format)
LINE %DP Enable/Disable Reading Line Probe From DSP during handshake
PROBE L9 Display of Signal Strength Information
COMMANDS L10 Display Signal to Noise Ratio (SNR)
L11 Display of Noise Information
&RP Initiates Retrain to Read Line Probe Parameters
READ AND Sr? Read Current S-Register Value
ASSIGN Sr= Assign S-Register Value
S-REGISTER
VALUES
REMOTE #CBN Passwords for Callback Phone Numbers
CONFIGURATION #DB Callback Security Enable/Disable
& CALLBACK #I Change LOGIN Password
SECURITY #RCBNxx Erase Password Linked with Memory Location xx
#S Change SETUP Password
TEST MODEM U Self-Test Modem (Chapter 8)
&T Enable/Disable Digital Loopback Signal
LEASED-LINE $LL Leased-Line Handshake
HANDSHAKE
(MT2834BL)