Oven cooking, Control panel, Using the touchpads – Maytag 700 User Manual

Page 10: Clock

Advertising
background image

Control Panel

The control panel is designed for ease in programming. The display window on the control shows time of day, timer and oven functions.
Control panel shown includes model specific features. (Styling may vary depending on model.)

Using the Touchpads

• Press the desired pad.

• Press More+ or Less- to enter time or temperature.

• A beep will sound when any pad is touched.

• A double beep will sound if a programming error occurs.

A

Broil

Use for broiling and top browning.

B

Bake

Use for baking and roasting.

C

More+/Less-

Enters or changes time, oven
temperature. Sets HI or LO broil.

D

Timer

Sets Timer.

E

Cook & Hold

Bakes for a preset time, then holds food
warm for 1 hour.

F

Clean

Use to set self-clean cycle.

G

Favorite

Use to set and save a specific cook and
hold procedure.

H

Clock

Use to set time of day clock.

I

Keep Warm

Use to keep cooked food warm in oven.

J

CANCEL

Cancels all operations except Timer
and Clock.

A B

C D

E F G H I J

Note: Four seconds after pressing the More+ or Less-
pads, the time or temperature will automatically be
entered. If more than 30 seconds elapse between touch-
ing a function pad and the More+ or Less- pads, the
function will be canceled and the display will return to the
previous display.

Clock

The clock can be set to display time in a 12-hour or 24-hour
format. The clock is set at the factory for the 12-hour format.

To change the clock to
24-hour format:

1. Press and hold the CANCEL and

Favorite pads for three seconds.

2. Set the time of day following the

directions below.

To set the Clock:

1. Press the Clock pad.

• The time of day and colon flash in the

display.

2. Press More+ or Less- to set the time of day.

• Colon continues flashing.

3. Press the Clock pad again or wait four seconds.

When electrical power is supplied or after a power interrup-
tion, the last clock time before power was interrupted will
flash.

To recall the time of day when another time function is
showing, press the Clock pad.

Clock time cannot be changed when the oven has been
programmed for cook or clean Delay or Cook & Hold.

9

Oven Cooking

Advertising