Oven cooking, Oven light, Oven bottom – Maytag 700 User Manual

Page 18: Oven vent, Oven racks, Rack positions, Caution

Advertising
background image

17

Oven Light

Press the Oven Light switch on the control panel to
turn the oven light on and off.

Oven Bottom

Protect oven bottom against spillovers, especially acidic or
sugary spills, as they may discolor the porcelain enamel. Use
the correct pan size to avoid spillovers and boilovers. Do not
place utensils or aluminum foil directly on the oven
bottom.

Oven Vent

When the oven is in use the area near the vent may become
hot enough to cause burns. Never block the vent opening.

The oven vent is located below the backguard vent
shield on your range.

CAUTION

Oven Racks

• Do not attempt to change the rack position when the oven

is hot.

• Do not use the oven for storing food or cookware.

The oven has two racks. All racks are designed with a lock-
stop edge.

To remove:

1. Pull rack straight out until it

stops at the lock-stop
position.

2. Lift up on the front of the

rack and pull out.

To replace:

1. Place rack on the rack support in the oven

2. Tilt the front end up slightly. Slide rack back until it clears

the lock-stop position.

3. Lower front and slide back into the oven.

Never cover an entire rack with aluminum foil or place
foil on the oven bottom. Baking results will be affected
and damage may occur to the oven bottom.

Rack Positions

RACK 7 (highest
position): For toasting
bread or broiling thin,
non-fatty foods.

RACK 6: Used for most
broiling.

RACK 5: For two rack
baking.

RACK 4: Used for most baked goods on a cookie sheet or
jelly roll pan, fruit pies, or frozen convenience foods. Also use
for broiling chicken pieces.

RACK 3: For casseroles, baking loaves of bread, bundt cakes
or custard pies.

OVEN VENT
LOCATION

Do not place
plastics near the
vent opening as
heat from the vent
could distort or
melt the plastic.

Oven Cooking

cont.

Two Rack Baking

7

6

5

4

3

2

1
Oven
Bottom

Advertising