Motorola DSR315 - Manual (Page 56)

5
44
6. Lock Channel on "No Info" in Guide. This option will allow you to lock any
programming that is listed as "No Info" in the Guide.
Setting Timers
With timers, you can schedule your viewing up to one year in advance—whether
you want to schedule one-time-only events or daily programs. Once you have set
the timer, the receiver will automatically tune to the channel when the program
begins. You can change, erase, and review the timers whenever you wish. Make
sure to set your VCR if you wish to make a tape since the receiver will not
automatically program your VCR to tape an event.
Sleep Timer. Sometimes
when you are watching a
program in SAT mode, you
will want to automatically
turn off the picture and
sound because you plan to
fall asleep after a certain
amount of time.
To set the sleep timer:
• Display the Options
menu (press the
OPTIONS key on the
remote control).
• Select option 6 (Change System Settings), and the System Settings menu
appears.
• Select option 5 (Sleep Timer) to highlight it.
• Press the 34 keys to set the amount of time you wish to watch and hear a
program until the sleep timer shuts off the picture and sound (shown in hours
and minutes). The maximum time limit is 3 hours.
NOTE: Any time that a sleep timer is set, the LOCKS option re-sets itself to On.
See "Setting Parental Controls & Passwords."
How to Display the Timers Menu
• Display the Options menu.
• Select Option 4 (Set Timers). the Timers menu appears.