Motorola DSR315 - Manual (Page 62)

5
50
TV Viewing. The TV Viewing option allows you to select the size of the viewing
area. Select the Normal option if your TV screen is typical screen with 4:3 ratio of
width to height. Select Wide if your TV screen is a wide screen with a 16:9 ratio.
The default setting is Normal.
Audio Settings
To adjust the audio settings so
that they are correct for the type
of equipment connected to your
receiver, you will be using the
onscreen menus. Typically, these
settings are selected at the time
of initial installation by your
installer.
• Press the OPTIONS key on
the remote. The Options
menu appears.
• From the Options menu, select option 6 (Change Systems Settings), and the
System Settings menu appears.
• From the System Settings menu, select option 2 (Change Audio Settings), and
an Audio Settings menu will appear.
Audio Settings Menu for Satellite Broadcasts. On the Audio Settings menu two
options appear:
• Select option 1 (Audio Connections), and you will be able to select either TV
or Hi Fi (the default is TV), Select TV if the receiver’s AUDIO OUT port is
connected to your TV. Select Hi Fi if it is connected to your stereo system.
• Select option 2 and then select Mono, Stereo, Surround or Dolby Digital (the
default is Surround). The Dolby Digital selection will disable other audio
ports.