Streamtv™ internet – MITSUBISHI ELECTRIC Mitsubishi Electric Laservue L75-A94 User Manual
Page 23
3. TV Features
23
For assistance call 1(877) 675-2224
StreamTV™ Internet
Internet services let you access many popular on-line
applications providing both free and paid content.
Note: From time to time you may notice changes to
the internet interface as new features are added.
Required for StreamTV internet media:
•
Broadband internet service (at least 2 Mbps for SD,
4 Mbps for HD, and 8 Mbps for 1080p HDX)
•
Category-5 Ethernet cable or a wireless router
•
Computer access to the websites of content provid-
ers when initial account activation is required for
service.
•
A credit card to cover the cost of paid content.
Setup > Network, DHCP connection
3.
Press EXIT to clear the menu.
Manual
Note: Manual setup is available only for a wired con-
nection.
1.
Connect the TV to your network router with a Cat-
egory-5 Ethernet cable (not supplied).
2.
In the Setup > Network menu, highlight Manual
and press ENTER
.
3.
Press to move to the Connection Data area.
4.
Input the connection data.
5.
After entering connection data, press ENTER to
connect.
6.
Change any of the following if needed:
• Default
Gateway
• DNS
• Subnet
Mask
Wir eless Connection
This TV is IEEE 802.11n-compliant and can communi-
cate directly with your wireless router.
1.
Disconnect the Ethernet cable if present.
2.
Open the Setup > Network menu. After a few
moments, detected networks will appear listed on
the screen in order of signal strength.
Setup > Network menu, wireless connection
Home N etwork Setup
Before using StreamTV internet media, you must
connect the TV to the internet using either an Ethernet
cable or a wireless connection as described here.
Note: Make sure the TV is on any input other than
USB. Press the INPUT key to change.
Wired Ethernet Connection
DHCP (automatic)
1.
Connect the TV to your network router with a Cat-
egory-5 Ethernet cable (not supplied).
HDMI
H
DM
I
Ethernet
cable
TV
Internet
router or
modem
Incoming
high-speed
internet
service
2.
Open the Setup > Network menu to review set-
tings.