Networks & services > services – Multitech ROUTEFINDER RF830-AP User Manual
Page 37
Chapter 5 – Configuration Using Web Management Software
Multi-Tech Systems, Inc. RouteFinder SOHO RF820/RF820-AP & RF830/RF830-AP User Guide (S000399E)
37
Networks & Services > Service Configuration
Networks & Services > Services
On this screen you can specify the standard set of well known services available on the system. These
services enable the configuration of the user defined services. The options to Delete or Edit a service after it
has been defined and added are available by using the table at the bottom of the screen. However, standard
sets of well known services cannot be edited or deleted.
Service Entries on This Service Configuration Screen Will Display on the Following Screens
Packet Filters > Packet Filter Rules
Packet Filters > Advanced Filters > MAC Address Based Filtering
Network Setup > SNAT, DNAT
RF820/RF820-AP and RF830/RF830-AP Service Configuration Screen
This is an example of screen with the TCP protocol selected.