Moxa Technologies UC-7110 User Manual
Page 52
UC-7110 Series User’s Manual
UC Finder
6-4
6. The Searching window will show the Universal Communicators that have been located. You
can click on Stop as soon as the Universal Communicator you are looking for is listed.
7. When the search is complete, the Broadcast Search window closes, and the Model, MAC
Address, and IP Address of all Universal Communicators that were located will be listed in
the UC Finder window.
ATTENTION
UC finder is designed solely to find IP addresses of networked Universal Communicators. It
cannot be used to configure Universal Communicators over the network. If you need to
configure UC’s IP address or other parameters, connect to UC’s console utility by Telnet (over
the network) or serial console (using the serial console cable that came with the product).
The next time you need to run UC Finder, double click on the UC Finder icon located on your
PC’s desktop to launch this utility.