Marmitek 300 User Manual
Page 3
2.
SET CONTENTS.
1
Transmitter.
1
Receiver (scart).
1
IR receiver.
2
Power adapters.
1
IR extender with 3 LEDs.
1
3.5 mm jack plug/RCA adapter (audio).
1
RCA/RCA cable (white/red/yellow).
1
Scart/scart RCA adapter.
1
User manual.
3.
INSTALLING THE TRANSMITTER.
See images 1 and 2.
The transmitter can be connected to any A/V device.
1.
Connect the RCA/RCA cable to the ‘A/V IN’ on the back of the transmitter [C+D]. Make
sure the colours of the plugs and the connectors correspond.
2.
Connect the other side of the RCA/RCA cables to the A/V device from which you want
the signal to be transmitted.
If the A/V device has a scart connection, we advise you to use it.
Plug the scart/scart RCA adapter included into the scart connection of your A/V device.
If another scart cable has already been connected to the ‘OUT’ connection of your A/V
device, you should remove it. Plug the scart/scart RCA adapter into the scart connection
of your A/V device. The cable you just removed from the A/V device can be reconnected
to the back of the scart/scart RCA adapter. This ensures that the original connection is
preserved.
Connect the RCA/RCA cable to the yellow, red and white connections on the scart/scart
RCA adapter. See image 1 for more details.
3.
Switch the channel selector [A] (A-B-C-D) to A.
4
MARMITEK
Image 1
GIGAVIDEO TRANSMITTER
ORIGINAL SCART CABLE
TO TV
TO A/V DEVICE
SCART/SCART
RCA ADAPTER
20129_20060817_UG_scart300 26-09-2006 11:02 Pagina 4