Marantz CD6002 - Manual (Page 24)

21
ENGLISH
OTHER FUNCTIONS –AUDIO CD–
PITCH CONTROL
(CHANGING THE PLAY SPEED)
The play speed (pitch) can be changed across a
±12 step.
Note:
Digital signals are not output during pitch control.
(Signals are output when the pitch control is set
to 0).
7 Increasing the play speed
Press the PITCH+ button on the remote control
unit.
“PITCH” will light up and each time the button is
pressed, the playback speed will increase (max
+12).
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18
PITCH
Light up
7 Reducing the play speed
Press the PITCH- button on the remote control
unit.
“PITCH” will light up and each time the button is
pressed, the playback speed will decrease (min
-12).
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18
PITCH
Light up
7 Returning play to the normal speed
Press the PITCH RESET button on the remote
control unit.
The “PITCH” indicator on the display goes off and
“Pitch: 0” appears on the main display.
If the PITCH RESET button on the remote control
unit is pressed again, play returns to the previous
speed setting.
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18
PEAK SEARCH
(SEARCHING FOR THE
LOUDEST PASSAGE)
If the cassette deck recording level is adjusted in
relation to the peak level on the disc, it is possible
to avoid distortion and noise in recording. This
facility allows the peak over the entire disc or in
the programmed to be detected tracks before
proceeding to editing.
1. Press the MENU button on the remote control
once. “Peak” will be displayed.
2. Press the ENTER button on the remote
control.
“PEAK” will light up and the peak search
operation will begin from the first passage on
the disc.
TTL TRK PEAK TIME
TEXT 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20
Light up Light up
3. When peak search of the last passage is
c o m p l e t e d , p l ay w i l l b e r e p e a t e d fo r
approximately 6 seconds with the volume at a
comparatively high level. Adjust the record level
of the cassette deck. (Please see the instruction
manual for the cassette deck.)
TTL TRK PEAK TIME
TEXT 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20
Light up Light up
4. Press the 7 button on the player or remote
control unit to stop the peak search operation.
Note:
As a CD may contain several peaks, a different
peak may be found every time the auto peak
level search operation is performed.