Marantz CD6002 - Manual (Page 9)

6
ENGLISH
NAMES AND FUNCTIONS
FRONT PANEL
z POWER ON/STANDBY switch and
Standby indicator
This is used to turn the player’s power ON and
STANDBY. When it is pressed, the display lights
and the power is turned on; when it is pressed
again, the power is turned off and STANDBY
indicator lights.
x Disc tray
This is where the CD to be played is placed.
c Display
This shows the settings, play status, text
information, etc.
v Remote sensor
This senses the infrared control signals sent
from the remote control unit.
b OPEN/CLOSE 0 button
This is used to open and close the disc tray.
When it is pressed, the disc tray opens; when it
is pressed again, it closes.
n PLAY 3 button
This is used to start play.
m STOP 7 button
This is used to stop play.
, PAUSE 8 button
This is used to temporarily suspend play.
. PHONES LEVEL control
This is used to adjust the headphones volume
level. The level increases when it is turned
clockwise.
⁄0 PHONES jack
The headphones are connected to this jack.
Use headphones that come with a standard
plug.
⁄1 ¡/¢ (search forward/next track)
button
The same number of tracks as the number of
times the button is pressed are skipped in the
forward direction. When the button is held down,
tracks are searched (fast forward).
⁄2 4/1 (previous track/search
backward) button
When this button is pressed, play returns to the
start of the track now being played. The same
number of tracks as the number of times the
button is pressed can be skipped in the reverse
direction. When the button is held down, tracks
are searched (fast backward).
⁄3 DISPLAY OFF indicator
This lights in the DISPLAY OFF mode (when the
display is off).
⁄4 MP3 Indicator
This lights up when an MP3 file is being
played.
⁄5 WMA Indicator
This lights up when a WMA file is being played.
⁄3 ⁄5 ⁄2 ⁄1 ⁄0 .
b c v x n m ,
⁄4
z