Motorola SBG900 - Manual (Page 77)

71 SBG900 User Guide
Home
X
Exit Print
Overview Installation Troubleshooting Contact FAQ Specifications Glossary License
Configuration: Basic Gateway TCP/IP Wireless USB
Wireless > STATUS Page
You can use this display-only page to
• View the wireless interface status
•
Help perform Troubleshooting for wireless network problems
Wireless > STATUS Page Fields
Regulatory Domain Indicates the country the SBG900 is manufactured for. The list of channels depends on the
country’s standards for operation of wireless devi
ces. Depending on the domain set at the
factory, USA FCC, Europe, Spain, France, Japan, or some other country name is displayed.
ESSID Displays the ESSID set on the Wireless > NETWORK Page . For more information, see
“ Configuring the Wireless Network Name on the SBG900 ”. Never provide the ESSID to anyone
who is not authorized to use your wireless LAN.
Channel Displays the radio channel for the access point. If you encounter interference, you can set a
different channel on the Wireless > NETWORK Page.
RTS Threshold Displays the Request to Send Threshold set on the Wireless > NETWORK Page.
Frag Threshold Displays the Fragmentation Threshold set on the Wireless > NETWORK Page.
MAC Address Displays the SBG900 MAC address.
WEP Enabled Displays the type of Wired Equivalent Privacy (WEP) that is enabled. For more information, see
“
Configuring WEP on the SBG900 ”.
MAC Access Control Displays the MAC Access Control setting set on the Wireless > SECURITY — advanced Page:
• Allow Listed — Only clients in the MAC access control list can access the wireless LAN.
• Allow Any Station Access — Any wireless client can access the wireless LAN.
MAC Access Control List Displays the MAC addresses of wireless clients having access. The list is set on the Wireless >
SECURITY — advanced Page.