Setting up a usb driver in windowsxp, Setting up a usb driver in windows xp – Motorola SBG900 User Manual
Page 93
87
SBG900 User Guide
X
Exit
Overview Installation Troubleshooting
Specifications Glossary License
Configuration: Basic Gateway TCP/IP Wireless USB
Setting Up a USB Driver in Windows XP
1
Insert the Motorola SURFboard Wireless Cable Modem Gateway CD-ROM in the CD-ROM drive.
This CD
contains the USB drivers and must be inserted and read by the PC
before you connect the SBG900 to the
PC.
2
Connect the USB cable as shown in
.
A few seconds after you complete the USB connection, the Found New Hardware Wizard window is
displayed:
3
Be sure “Install the software automatically” is selected.
4
Click Next. Windows automatically searches for the correct USB drivers and installs them. If the installation is
successful, the following window is displayed:
Although your SBG model number may be different than in the images in this guide, the procedure
is the same.