Marantz RC5400 - Manual (Page 13)

User Guide
9
3. Press and hold either of the two Left and Right
Function buttons, then tap the device you would like to
jump to. No input select commands will be sent to
your receiver/preamp.
Device Scroll — You can also navigate the devices by tapping
t he DEVICE SCROLL buttons on the left and right side of the
UPPER TOOL BAR. Tap the Left arrow button to navigate to the
previous device. Tap the Right arrow button to navigate to the next
device.
Cursor Navigation — This function enables you to navigate to
the devices by pressing the Left and Right direction of the 4-way
Navigation button.
Note This function is deactivated by the factory setting.
You can activate it in the Setup pages (see page 13).
To switch this function on, tap the button in the LOWER TOOL
BAR. When this function was activated, the button is changed
to the button and icon is displayed in the UPPER TOOL
BAR where the left device scroll arrow button was. To switch
this function off, tap the button in the LOWER TOOL BAR
again.
Navigating the Pages
Page Overview —
The Page Overview page displays a
list of all the pages for one device.
You can jump immediately to another
control page in one device by tapping
the page buttons in the list.
Access Page Overview page by tapping
the PAGE OVERVIEW button
(Page number) in the UPPER TOOL BAR.
Getting Started