Marantz RC5400 - Manual (Page 24)

User Guide
20
1 Write a list of all of the actions in the operation you want to
record.
2 Gather all of the remote controls you will need for the operation.
3 Select ADD from the Mode menu. Choose “ Copy Existing
DEVICE ” when prompted (see page 33-36).
In the device list, there is a device labeled “ Help .
Tap it to add the Help device.
4 Switch to LABEL mode. Relabel the new device currently
labeled Help 1 (for details on relabeling devices, see page 30-
32).
Try to use a descriptive title like POWER, RECORD, etc.
5 Stay in LABEL mode. Relabel as many of the buttons on the
five pages as you need.
Tip Do not relabel the buttons labeled “ Press for More .... ” unless
the button is the last step in the operation.
6 Switch to LEARN mode. Teach each button the appropriate
command.
7 Switch to MOVE mode. Move the new device to the appropriate
position in the device list (remember, this determines the button
position on Device Overview page).
8 Return to USE mode and test out your new list.
9 You can make as many Help lists as you like. Simply repeat
steps 1 through 8 for each operation you would like to program
a help list.
Customizing Your RC5400
4. Programming Help List