Surface cooking, Tips to protect the smoothtop surface, Cleaning – Maytag MER5875RAF User Manual

Page 7: Flex-choice, Elements

Advertising
background image

6

Tips to Protect the
Smoothtop Surface

Cleaning

(see page 21 for more information)

• Before first use, clean the cooktop.

• Clean your cooktop daily or after each use. This will keep

your cooktop looking good and can prevent damage.

• If a spillover occurs while cooking, immediately clean the

spill from the cooking area while it is hot to prevent a tough
cleaning chore later. Using extreme care, wipe spill with a
clean dry towel.

• Do not allow spills to remain on the cooking area or the

cooktop trim for a long period of time.

Never use abrasive cleansing powders or scouring pads

which will scratch the cooktop.

Never use chlorine bleach, ammonia or other cleansers not

specifically recommended for use on glass-ceramic.

To Prevent Marks & Scratches

• Do not use glass pans. They may scratch the surface.

Never place a trivet or wok ring between the surface and

pan. These items can mark or etch the top.

• Do not slide aluminum pans across a hot surface. The pans

may leave marks which need to be removed promptly. (See
Cleaning, page 21.)

• Make sure the surface and the pan bottom are clean before

turning on to prevent scratches.

• To prevent scratching or damage to the glass-ceramic top,

do not leave sugar, salt or fats on the cooking area. Wipe
the cooktop surface with a clean cloth or paper towel
before using.

Never slide heavy metal pans across the surface since

these may scratch.

To Prevent Stains

• Never use a soiled dish cloth or sponge to clean the

cooktop surface. A film will remain which may cause stains
on the cooking surface after the area is heated.

• Continuously cooking on a soiled surface may/will result in

a permanent stain.

Surface Cooking

Flex-Choice

TM

Elements

(select models)

The Flex-Choice

TM

elemenst are fully

functioning elements that provide an
ultra low Melt heat setting for melting
chocolate and butter. They are located
in the left rear and right positions.

The Melt setting is located between
2 and OFF. Heat settings outside of this
area function as a normal element, with 2
(Low) to High settings.

Note: When using the normal settings for preparing foods,
it may take a few minutes for the cooking area to cool to
the Warm heat setting.

Warming Center Notes:

• Use only cookware and dishes recommended as safe for

oven and cooktop use.

• Always use oven mitts when removing food from the

Warming Center as cookware and plates will be hot.

• All foods should be covered with a lid or aluminum foil to

maintain food quality.

• When warming pastries and breads the cover should have

an opening to allow moisture to escape.

• Do not use plastic wrap to cover foods. Plastic may melt

on to the surface and be very difficult to clean.

Suggested Settings

Setting

Type of food

Min - 2

Breads/Pastries

Gravies

Casseroles

Eggs

2 - 5

Dinner Plate with Food

Sauces

Soups (Cream)

Stews

Vegetables

Meats

5 - Max

Fried Foods

Hot Beverages

Soups (Liquid)

Advertising