Base settings, Base ringtone, Base ringer volume – Motorola D1110 User Manual
Page 19: Dialling mode, Ring priority, Recall mode, First ring
Base settings
19
5. Base settings
Base ringtone
Select from 5 base ringtones.
You will hear a sample ring for each one you highlight.
1. Press
Menu
, scroll
d
to
Settings
and press
Select
.
2. Scroll
d
to
Set Base
and press
Select
.
3.
Ringtone
is highlighted. Press
Select
.
4. Scroll
u
or
d
highlight the ringtone you want.
5. Press
Select
to confirm.
6. Press
Back
to return to the previous menu level or
>
to return to
standby.
Base ringer volume
The base has 5 ringer volume settings plus Off.
1. Press
Menu
, scroll
d
to
Settings
and press
Select
.
2. Scroll
d
to
Set Base
and press
Select
.
3. Scroll
d
to
Ringer Volume
and press
Select
.
4. Press
u
or
d
to display the volume level you want. Press
Select
to
confirm.
5. Press
Back
to return to the previous menu level or
>
to return to
standby.
Dialling mode
Your D1111 is pre-set to Tone dialling. You should not normally need to change
this setting. The dial mode options are Tone or Pulse.
1. Press
Menu
, scroll
d
to
Settings
and press
Select
.
2. Scroll
d
to
Set Base
and press
Select
.
3. Scroll
d
to
Dialling Mode
and press
Select
.
4. Press
u
or
d
to highlight
Pulse
or
Tone
then press
Select
to confirm.
5. Press
Back
to return to the previous menu level or
>
to return to
standby.
Ring priority
When you have more than one handset registered to your base, you can
set one handset to ring before the other handsets. This allows one
handset user to answer all incoming first, like a receptionist.
Choose
All Handsets
if you want all handsets to ring at the same time or
Select Handset
to nominate a handset to ring two times before the others.
1. Press
Menu
, scroll
d
to
Settings
and press
Select
.
2. Scroll
d
to
Set Base
and press
Select
.
3. Scroll
d
to
Ring Priority
and press
Select
.
4. Press
u
or
d
to highlight
All Handsets
or
Select Handset
then press
Select
.
If you choose
Select Handset
all available handsets are displayed. Scroll
u
or
d
to highlight the handset you want then press
Select
.
Scroll
u
or
d
to the number of rings you want to set 2, 4 or 6 and press
Select
.
5. Press
Back
to return to the previous menu level or
>
to return to
standby.
Recall mode
1. Press
Menu
, scroll
d
to
Settings
and press
Select
.
2. Scroll
d
to
Set Base
and press
Select
.
3. Scroll
d
to
Recall Mode
and press
Select
.
4. Press
u
or
d
to highlight
Recall 1
or
Recall 2
then press
Select
to confirm.
5. Press
Back
to return to the previous menu level or
>
to return to
standby.
First ring
If you have subscribed to your network’s Caller Display service, your D1111
does not ring until the caller information has been received and displayed.
However, if you want your handset to ring without waiting for the caller
information to be displayed, set First Ring to On. Please note that this will
mean the first ring you hear will be the default ringtone. This will change
to any ringtone you have set once the caller information is displayed.
1. Press
Menu
, scroll
d
to
Settings
and press
Select
.
2. Scroll
d
to
Set Base
and press
Select
.
3. Scroll
d
to
First Ring
and press
Select
.