Switch remote access, Change the remote access pin, Switch your answer machine on remotely – Motorola D1110 User Manual
Page 30: Operating your answer machine from another phone
30
Answer machine
MEMORY FULL
If the memory is within 10 seconds of becoming full while a caller is
leaving a message, they will hear, “Please complete your message within
10 seconds”. If they are still talking when the memory becomes full the
caller hears, “Thank you for calling”, and the machine will hang up.
The OGM will set to
Answer Only
. You must delete messages before your
D1111 can record new messages.
Remote access
You can operate your answer machine from any Touchtone™ phone by
calling your D1111 and entering a 4 digit security code. Depending on the
language you have selected for your answer machine, for example,
Türkçe - voice prompt instructions will not be available.
Switch remote access On or Off.
1. Press
Menu
, scroll
d
to
Answer Machine
and press
Select
.
2. Scroll
d
to
Answer Settings
and press
Select
.
3. Scroll
u
or
d
to
Remote Access
and press
Select
.
4. Scroll
u
or
d
to highlight
On
or
Off
and press
Select
.
5. Press
Back
to return to previous menu or
>
key to return to standby.
Change the remote access PIN
1. Press
Menu
, scroll
d
to
Answer Machine
and press
Select
.
2. Scroll
d
to
Answer Settings
and press
Select
.
3. Scroll
u
or
d
to
Remote Access
and press
Select
.
4. Scroll
u
or
d
to highlight
Set Remote PIN
and press
Select
.
5. Enter the Old 4-digit PIN and press
Save
. (Default setting = 0000)
6. Enter the new 4-digit Pin and press
Save
.
7. Enter the new PIN again and press
Save
.
8. Press
Back
to return to previous menu or
>
key to return to standby.
It is advisable to make a note of your new PIN code and keep it
somewhere safe.
This PIN is different from the System PIN used when resetting the unit or
when registering/de-registering handset.
Switch your answer machine on remotely
If you forget to switch your answer machine on, you can do it remotely
from another phone.
1. Dial your telephone number and let it ring. After 14 rings you will hear
your outgoing message.
2. Press *, then enter your security code.
(Default setting = 0000)
3. Press
0
and your answer machine will switch on ready to answer
incoming calls.
Time saver
When you ring in to access your messages remotely, if your answer
machine is set to time saver and you have new messages it will answer
after 2 rings, if you do not have any new messages, it will answer after 6
rings. This means you can hang up after 3 rings knowing you have no
new messages, saving you time and the cost of the call.
You cannot use this feature if you have certain network features active as
the call will be intercepted before the 20 rings.
Operating your answer machine from another phone
1. Dial your phone number. When you hear your outgoing message,
press
*
.
2. Enter your 4 digit PIN. (Default setting = 0000)