Motorola D1110 - Manual (Page 34)

34 Text messaging
Deleting texts
1. Press Menu , Text Messaging is displayed. Press Select scroll
d
to Delete
Messages and press Select .
2. Scroll
u
or
d
to Inbox , Drafts , Outbox or All Messages and press Select .
3. Press Yes to confirm or No to cancel.
4. Press Back to return to standby.
Selecting All messages will delete all messages stored in your Inbox,
Outbox and Drafts box.
Service Centre numbers
To send and receive text messages you need the telephone number of
your Network’s text Centre. If you accidentally delete the Outgoing or
Incoming Service Centre numbers you will need to re-enter them in order
for your text Service to work. You can enter up to 4 Service Centre
numbers – two incoming and two outgoing.
If you have more than one ‘Server Centre’ stored on your D1111 you will
need to select which one you want to use for sending (see next section).
Add or change Service Centre numbers
1. Press Menu , Text Messaging is displayed. Press Select , scroll
u
or
d
to
Text Settings and press Select .
2. Service Centres is highlighted press Select .
3. Scroll
u
or
d
to Receive Centres or Send Centre and press Select .
4. Scroll
u
or
d
to Receive Centre 1 or Receive Centre 2 , or Send Centre 1 or Send
Centre 2 and press Select .
5. Enter the number for the centre and press Save .
6. Press Back to return to the previous menu level. To return to standby,
close the cover or press
>
.
Set send centre
1. Press Menu , Text Messaging is displayed. Press Select . Scroll
u
or
d
to
Text Settings and press Select .
2. Service Centres is highlighted press Select .
3. Press Select again to choose Set Send Centre .
4. Scroll
u
or
d
to Receive Centre 1 or Receive Centre 2 or Send Centre 1 or Send
Centre 2 and press Select .
5. Press Back to return to the previous menu level.
Message alert tone
When you receive a text message, the message alert tone will sound.
These beeps can be switched on or off.
1. Press
Menu , Text Messaging is displayed. Press Select . Scroll
d
to Text
Settings and press Select .
2. Scroll
d
to Message Alert and press Select .
3. Scroll
u
or
d
to On or Off and press Select .
4. Press Back to return to the previous menu level.
Set message size
A standard text message is 160 characters long. You can set a message
to be up to 612 characters and the message will be sent as up to 4 linked
messages each up to 160 characters long.
1. Press
Menu , Text Messaging is displayed. Press Select . Scroll
d
to Text
Settings and press Select .
2. Scroll
d
to Message Size and press Select .
3. Scroll
u
or
d
to highlight 160 or 612 characters, then press Select .
4. Press Back to return to the previous menu level.
User areas
Your D1111 is pre-set to make all text messages available to every user,
with all messages sent from and received at a ‘Common Box’.
To keep your messages private, you can set up to 4 PIN protected personal
user areas (sub-addresses). Each personal user area has its own Inbox
and Outbox which are only accessible when the correct PIN is entered.
You can also keep a common box sub address for incoming messages
that do not need to be kept private.
Add a user mailbox
If you set-up personal user boxes you must tell people your user area
number. They must put the relevant user area number at the end of your
telephone number when they send you a text message. If they do not
include the user area number, the messages will be stored in the common
box and will be accessible to all users of your D1111.