Motorola HS810 - Manual (Page 7)

Using Your Headset
12
Pairing Your Headset and Phone
Note: You must pair your headset and phone before you can make a call.
“Pairing” creates a link between devices equipped with Bluetooth wireless
technology and allows the phone to remember the headset’s unique ID. Once
your headset and phone are paired, your headset automatically connects to
your phone any time you open the boom.
Pairing
With the headset and phone in close proximity:
Step Result
1 Put the headset into pairing mode.
a With the headset’s boom
closed, press and hold the
Multifunction Button
E until the
headset indicator turns on
(about 3 seconds).
b Release the button, then open
the headset boom.
The headset indicator turns on.
The indicator remains lit.
13
Using Your Headset
Paired Link to Additional Devices
Your headset can store pairing information for up to eight different devices
equipped with Bluetooth wireless technology. Devices are stored in a “Paired
Device List” in memory in chronological order. When an attempt to pair to
more than eight devices is made, the oldest paired device is removed from
the list.
Any of the eight paired devices can initiate a paired connection to the headset.
2 Perform a device discovery from
the phone.
For details on device discovery
for your phone, refer to the
user’s guide for the phone. When the scan is complete, the
phone displays the devices
found.
3 Select the Motorola HS810 from the
discovered devices list and confirm
following the on screen prompts.
4 When prompted by the phone, enter
the passkey
0000
and confirm to
pair the headset with the phone.
The device ID is now stored in
the phone’s memory.
Pairing is successful when the
headset indicator flashes 10
times rapidly.
Step Result