Using your headset, Using your headset using your headset indicators, Headset indicator (led) – Motorola HS810 User Manual
Page 9
Using Your Headset
16
Note: If the link is abnormally disconnected (e.g., out of range) the headset
tries to reestablish the link.
Device Status
Action
Function
Phone
Headset
Hands Free Profile
Headset Profile
Put Active
Call On Hold
On–in call
On
Long press
E
N/A
Receive a
Call
On–phone
rings
On
Short press
E (call
is answered)
Press
E (call is
answered)
Reject a Call
On–phone
rings
On
Long press
E
N/A
Answer 2nd
incoming call
On–in call,
2nd call
coming in
On
Long press
E,
places 1st call on
hold, answers
incoming call
N/A
Toggle
between two
active calls
On–in call,
2nd call on
hold
On
Long press
E
N/A
Transfer call
from phone to
Headset
On–in call
On
Short press
E, (call
transferred to
headset)
Press
E (call
transferred to
headset)
17
Using Your Headset
Using Your Headset Indicators
Headset Indicator (LED)
With charger plugged in:
With no charger attached:
Note: When the wireless headset is paired to the phone and there is no
activity for 5 minutes, the blue flashing LED turns off. Any button press on the
headset will reawaken the headset and the flashing resumes. If you press the
up and down volume buttons simultaneously during a call, the pulsing LED
turns off for the duration of that call.
Headset Indicator
Headset
ON
charging in progress
OFF
charging complete
Headset Indicator
Headset
OFF
power off
ON (steady)
pairing mode
10 rapid flashes
pairing successful
flashes at a 3-second interval
(.1 seconds ON 2.9 seconds OFF)
standby (not on a call)
pulses at an 8-second interval
(2.0 seconds ON, 6.0 seconds OFF)
connected (on a call)