Miele KM 344 - Manual (Page 16)

All cooktops come set for connection to
either natural gas or LP gas. The ad-
justment of the included regulator cor-
responds with the gas type of the
cooktop. If the appliance is to be con-
nected to LP gas, both the regulator
and burners must be converted.
WARNING
The conversion kit must be in-
stalled by a qualified technician in
accordance with the manufac-
turer’s instructions and all appli-
cable local and national codes.If
the information in these instruc-
tions is not followed exactly, a fire,
explosion or production of carbon
monoxide may result causing
property damage, personal injury
or loss of life.The qualified techni-
cian is responsible for the proper
installation of this kit.The installa-
tion is not proper and complete
until the operation of the con-
verted appliance is checked as
specified in the instructions sup-
plied with the conversion kit.
To convert the regulator:
– Unscrew the hexagonal silver cap lo-
cated on the top of the regulator.
– Make sure that the spring stays in
place.
– Flip it over and screw it back in
place. A stamp should be visible on
top of the cap or at the bottom of the
center hole when converted ("LP" for
LPG and "NG" for Natural gas).
Converting to LP gas
16