Adjusting the interior fittings 30, Moving the shelves 30, Split shelf 30 – Miele KF 9757 iD User Manual

Page 30: Adjusting the interior fittings, Moving the shelves split shelf, Moving the shelves, Split shelf, Perfectfresh zone compartments

Advertising
background image

Moving the shelves

The shelves can be adjusted according
to the height of the food.

^ Raise the shelf, and pull it forwards

slightly until the notch at the side is in
line with the shelf support. It can then
be raised or lowered to the required
level.

The raised edge at the back must face
upwards to prevent food from touching
the back of the appliance and freezing
to it.

Stoppers prevent the shelves from
being dislodged by mistake.

Split shelf

In order to accommodate tall items in
the appliance, one of the shelves is
divided. The front section can be
pushed under the rear section.

^ Pull the front half of the glass shelf

forwards slightly and then push it
carefully under the rear half.

To move the split shelf:

^ Take both halves of the split glass

shelf out,

^ fit the two brackets onto the supports

on either side at the required height,

^ and push the glass shelves in one

after the other. The shelf with the
raised edge must be at the back.

PerfectFresh zone
compartments

The compartments in the PerfectFresh
zone are on telescopic rails, and can
be removed for filling, emptying or
cleaning purposes.

^ Pull out the compartment as far as it

will go, and then lift it up and out.

Push the runners back in again to
avoid injury or damage.

Adjusting the interior fittings

30

Advertising