Miele KF 9757 iD - Manual (Page 39)

Never use cleaning agents
containing abrasive substances
such as sand, soda, acids chlorides
or chemical solvents.
"Non-abrasive" cleaning agents are
also unsuitable as they can cause
matt areas to appear.
To help prevent re-soiling, treat
stainless steel surfaces with a
proprietary conditioning agent for
stainless steel (available from the
Miele Spare Parts Department or via
the internet on www.miele.co. uk).
Do not let water get into the
electronic unit or into the light.
Do not let water get into the
drainage channel and drain hole
when cleaning.
Do not use steam cleaning
apparatus to clean the appliance.
Steam could reach the electrical
components and cause a short
circuit.
The data plate located inside the
appliance must not be removed. It
contains information which is
required in the event of a service
call.
Before cleaning
^ Switch the appliance off by pressing
the master On/Off switch on the right
hand side of the control panel, switch
off at the socket and remove the
plug.
^ Take any food out of the appliance
and store it in a cool place.
^ Defrost the freezer.
^ Take out any removable parts, e.g.
shelves, for cleaning.
E-Cloth
A microfibre “E-Cloth” is available from
the Miele UK Spare Parts Department,
which is suitable for cleaning surfaces
such as stainless steel, glass, plastic
and chrome without the use of
chemicals. It can be washed 300 times.
Cleaning the interior and
accessories
Use warm water with a little washing-up
liquid. Wash all accessories and
drawers by hand only. Do not wash in a
dishwasher.
^ Clean the refrigerator section at least
once a month and the freezer section
each time it is defrosted.
^ Clean the condensate channel and
drain hole frequently, so that
condensate can drain away
unhindered. Use a straw or similar to
clear the drain if necessary.
^ After cleaning, wipe the interior and
accessories with a damp cloth and
dry with a soft cloth. Leave the doors
open to air the appliance for a short
while.
Cleaning and care
39