Miele KF 9757 iD - Manual (Page 55)

^
With 16 mm thick unit walls :
Remove the protective strip from
sealing strip
d and stick it to the side
of the appliance on which the door is
opened (so that it is flush with the
front edge).
Shorten the sealing strip to the height
of the niche, if necessary.
^ Clip spacers e onto the upper
hinges and spacers
f onto the lower
hinges.
Building in the appliance
^ Depending on the thickness of the
appliance housing walls, now push
the appliance into the niche until
– the spacer pieces touch the
housing unit wall
a
(16 mm thick walls),
– or the front edges of the hinges are
flush with the side walls of the
housing unit
b
(19 mm thick walls).
^ Press the appliance against the wall
on the hinge side.
^ Align the appliance height on both
sides by altering the adjustable feet
using the spanner supplied
c.
Building in the appliance
55