Miller Electric MARK VIII-2 - Manual (Page 2)

Litho in USA
Distributed by:
Power Source and Options Stock No. Description Qty. Price
Mark VIII-2 #901 348 230/460/575 V, 60 Hz
#902 703 220/380/440 V, 50/60 Hz
Mark VIII-2 Module #902 149
MIG Accessories
SuitCase 8VS #194 890 See Lit. Index No. M/6.4
SuitCase X-TREME 12VS #195 500 See Lit. Index No. M/6.41
MIG Hook-Up Kit #173 856 2/0 cable, 25 ft. Includes gas hose,
weld cable, ground cable with clamp
and regulator/flowmeter.
RHC-3 #040 056 Remote hand control. 20 ft (6 m)
#195 354 Remote hand control. 100 ft (30.5 m)
Gas Cylinder
Gas Hose and Fittings
Stick Accessories
Stick Hook-Up Kit #173 851 2/0 cable, 50 ft. Includes electrode holder,
weld cable and ground cable with clamp.
Stick Electrodes
Scratch Brush
Chipping Hammer
TIG Accessories
HF-251D-1 #042 388 HF arc starter/stabilizer
Torch and Consumable Parts
Gas Cylinder
Gas Hose and Fittings
Tungsten
Miscellaneous
Primary Power Cable
Helmet
Welding Gloves
Date: Total Quoted Price:
Ordering Information and System Checklist
Control Panel
2 3 1
4 5
1. Polarity Jumper Link
2. Remote Amperage Control Switch
3. Module Circuit Breaker
4. Amperage Adjustment Control
5. Remote Amperage Receptacle
HF-251D-1 High Frequency Arc Starter
#042 388
This portable 250 amp, 60% duty cycle unit adds
high frequency to the welding circuit to help start
the TIG arc. Operates on 115 VAC 50/60/100 Hz.
See Lit. Index No. AY 5.1.
SuitCase ™ 8VS Wire Feeder #194 890
SuitCase ™ X-TREME ™ 12VS Wire Feeder
#195 500
Lightweight, portable, voltage-sensing wire feeders
include secondary contactor and gas valve.
Require drive roll kit. See Lit. Index Nos. M/6.4
and M/6.41.
RHC-3 Remote Hand Amperage Control
#040 056 20 ft (6 m) cable and plug.
#195 354 100 ft (30.5 m) cable and plug.
MIG Hook-Up Kit
#173 856 25 ft (7.6 m) 2/0 cable
Includes gas hose assembly, lugged weld cable
assembly and work cable with clamp.
Stick Hook-up Kit
#173 851 50 ft (15.2 m) 2/0 cable
Includes electrode holder, weld cable and ground
cable with clamp.
Accessories