Monessen Hearth WOODBURNING PENINSULAR 624WBPF - Manual (Page 10)

10
624WBPF Woodburning Fireplace
53D9052
WH36
Glass Doors
(Standard)
Chimney
Support
11CS
30° Elbow Set
11CF30-2
Hearth
Extension Kit
H1652
Firestop Spacer
FS2A, FS6A
Flashing
8-6-12, 8-12-12
AK4
Combustion
Air Assembly
(AK6 for
Manufactured Home
Installation)
Chimney Cap
RLTCF11
SLTCF11
Extended
Chimney Cap
RLTCF11L
Chimney Sections
11CF4 11CF3 11CF18 11CF1
Flat Flashing
36"x72" (13.5" Diameter Hole)
FP2351
MPL fireplace components
MPL
Penisula
Fireplace
Model Number description
624WBPF Peninsula Style Fireplace
11CF1 12” chimney section
11CF18 18” chimney section
11CF3 36” chimney section
11CF4 48” chimney section
11CF30-2 30° elbows (package contains two 11” diameter elbows) One pair is required for each offset.
11CS Chimney support (required when chimney height exceeds 30 feet)
SLTCF11 Chimney cap for contemporary installations.
RLTCF11 Round chimney cap for contemporary installations.
RLTCF11L Extended chimney cap for contemporary installations.
8-6-12 0-6/12 pitch flashing for contemporary installation.
8-12-12 6/12 to 12/12 pitch flashing for contemporary installation.
FS2A Vertical Firestop spacer - One required at each ceiling or floor level.
FS6A 30° Firestop spacer - for 30° chimney incline through ceiling or floor.
FP-4-U 4” flexible combustion air duct-8-foot lengths.
403 4-inch duct connector (for splicing FP-4 ducts). Includes two clamps.
AK4 4” outside combustion air assembly.
WH22 End glass door assembly (1 required)
WH36 Glass door assembly (2 required)
FirePlace coMPoNeNtS