Matsushita CF-19FHGAX User Manual
Page 26
9.1.9.
Removing
the Main PCB, Wireless
Module,
SD PCB, Antenna PCB and
Modem
PCB
Note:
This
procedure is not necessary if the computer is not
equipped
with Wireless Module or Modem PCB.
1. Disconnect
the 2 LCD Cables. (CN8,CN17)
2. Remove
the gray, black and white Antenna Cables.
3. Remove
the 2 Screws <N3> and the 3 Screws <N9>.
4. Remove
the 2 screws <N3>, and remove the DU PCB,
Plate
and Antenna PCB.
5. Remove
the 2 Screws <N8>, and remove the HDD Con-
nector
Guide.
6. Remove
the 2 Screws. <N9>
7. Disconnect
the Cable from the Connector. (CN15)
8. Remove
the BAT FPC Ass'y.
9. Remove
the 3 Screws. <N19>
10. Disconnect
the Cable from the Connector (CN21), and
remove
the SD PCB Ass'y.
11. Disconnect
the Cable from the Connector (CN3), and
remove
the Coin Battery.
12. Remove
the 2 Screws <N19>, and remove the Wireless
Module.
13. Remove
the 2 Screws <N19>, and remove the Modem
PCB.
Connector(CN8)
Connector(CN17)
<N9>
<N9> <N9>
<N3>
<N3>
<N3>
<N3>
Plate
Antenna
PCB
DU
PCB
gray
cable
black
cable
white
cable
<N8>
<N8>
<N9>
<N9>
<N19>
<N19>
HDD
Connector
Guide
SD
PCB Ass'y
Connector
(CN882)
BAT
FPC Ass'y
Connector(CN15)
Connector(CN3)
DIMM
Holder Wireless Module
Modem
PCB
Coin
Battery
<N19>
<N19>
<N19>
<N19>
<N19>
<N19>