Matsushita CF-19FHGAX - Manual (Page 50)

14. Fix the DU PCB and the Plate using the 2 screws <N3>.
15. Fix the DU PCB Ass'y and Antenna PCB using the 3
screws <N9> and the 2 screws <N3> .
16. Connect the white, black and gray Cables.
17. Turn the computer over, open the Display Unit, and then
connect the 2 LCD Cables. (CN8,CN17)
Note:
Tighten the Screws in the numbered order (No1 to No7).
Screws <N3> : DFHE5108ZA
Screws <N8> : DRSB2+10FKL
Screws <N9> : DRSB2+5FKL
Screws <N19> : XSB2+3FNL
<N9>
<N9> <N9>
<N3>
<N3>
<N3>
<N3>
Plate
Antenna PCB
DU PCB
gray cable black cable white cable
Connector(CN8)
Connector(CN17)