Matsushita CF-19FHGAX - Manual (Page 55)

9.2.12. Setting
the Audio PCB
1. Connect the Cable to the Connector. (CN901)
2. Fix the Audio PCB using the 3 Screws. <N9>
Note:
Tighten the Screws in the numbered order (No1 to No3).
Screws <N9> : DRSB2+5FKL
Insert the end of the Sheet into the space between the Main
Board and the bottom of the PCMCIA Slot.
(Left and Right 0.5mm, Apply 20 to 30N (2.0 to 3.0 Kgf))
0 0.5mm
Ensure that both top and
bottom are hooked.
Slide surface
SD Blind Sheet
Attach it fitting to the right
0 0.5mm
Screw
Screw
Battery FPC Ass'y
Insert the FPC as illustrated
<N9>:No1
<N9>:No.2
Audio PCB
Connector(CN901)
<N9>:No.3