Motorola PMR446 - Manual (Page 9)

English
9
Installation of AAA Batteries
• Press the dimple on the battery door to release the clip
and slide it off the radio.
• Insert 3 AAA batteries into the battery tray as shown by
the markings inside the tray.
• Insert the battery tray into the battery compartment and
press into place.
• Slide and snap the battery door into place.
• Press S until A or n flashes (this menu does not appear
if using a Motorola Li Ion battery).
• Press ] or [ to select A for alkaline batteries, or n for
rechargeable AAA cells.
Charging the Battery
Use only the charger supplied with the radio, or other
_ Series power accessories. For optimum battery life,
do not charge the battery for prolonged periods after it is
fully charged. Charging the battery over the weekend is
acceptable.
Using the Drop-in Charger
• Place the charger on a flat surface.
• Insert the jack plug of the power supply into the jack
socket on the charger.
• Plug the power supply into a standard AC wall socket.
• Ensure radio is off. If the radio is on while charging, it will
take longer to fully charge.
• Insert the radio (with battery installed) into the front
section of the charging pocket.
?????-CLS446 User Guide 25/9/03 4:11 PM Page 9